旋转对称结构零部件时变可靠性模型

王正

旋转对称结构零部件时变可靠性模型

王正

中国北方发动机研究所, 柴油机高增压技术国防重点实验室, 大同 037036

基金项目:

国家自然科学基金资助项目(50905007); 国防科技重点实验室基金资助项目(9140C3306131001)

详细信息

中图分类号: TB114.3;TH122
计量
- 文章访问数: 7953
- HTML全文浏览量: 247
- PDF下载量: 813
- 被引次数: 0
出版历程
- 收稿日期: 2011-03-17
- 网络出版日期: 2012-06-30

Time-dependent reliability models of components with rotatory-symmetrical structure

Wang Zheng

National Key Laboratory of Diesel Engine Turbocharging Technology, China North Engine Research Institute, Datong 037036, China

摘要

摘要: 分析了旋转对称结构零部件的失效特点以及对称单元数对零部件可靠性的影响,建立了能体现对称单元数的旋转对称结构零部件强度概率密度函数和累积分布函数.分别以随机载荷作用次数和时间为寿命度量指标,建立了随机载荷作用下能够全面体现载荷、强度、对称单元数、寿命指标等参数影响的旋转对称结构零部件时变可靠性模型与失效率计算模型.研究表明:在强度不退化的情况下,旋转对称结构零部件的可靠度也会随着寿命指标(载荷作用次数或时间)逐渐降低,失效率随寿命指标逐渐减小.对于具有相同对称单元的旋转对称结构零部件,随着对称单元数的增加,零部件可靠度会降低且失效率会增大.
- 旋转对称结构零部件 /
- 时变可靠度 /
- 失效率 /
- 载荷作用次数 /
- 强度分布
Abstract: The failure characteristic of components with rotatory-symmetrical structure and the effect of the number of symmetrical parts on their reliability were analyzed. The probability density function and cumulative distribution function of strength of components with rotatory-symmetrical structure were developed. Then, taking the number of load application and time as its life parameter, respectively, the time-dependent reliability models and failure rate models of components with rotatory-symmetrical structure were derived, which consist of load, strength, the number of symmetrical parts and life parameters. The results show that when strength doesn-t degenerate, the reliability of components with rotatory-symmetrical structure still decreases as the life parameter (namely, the number of load application and time), and the failure rate also decreases as the life parameter. For the components consisted of the identical symmetrical part, its reliability decreases as the number of symmetrical part increases, and its failure rate increases as the number of symmetrical part increases.
- components with rotatory-symmetrical structure /
- time-dependent reliability /
- failure rate /
- number of load application /
- probability distribution of strength

HTML全文

参考文献(14)

[1]	Shen M-H Herman.Reliability assessment of high cycle fatigue design of gas turbine blades using the probabilistic Goodman diagram[J].International Journal of Fatigue,1999,21(7):699-708
[2]	Kumar P,Narayanan S.Nonlinear stochastic dynamics,chaos,and reliability analysis for a single degree of freedom model of a rotor blade[J].Journal of Engineering for Gas Turbines and Power,2009,131:1-8
[3]	Wang Zheng,Xie Liyang.Dynamic reliability model of components under random load[J].IEEE Transactions on Reliability,2008,57(3):474-479
[4]	An Zongwen,Huang Hongzhong,Liu Yu.A discrete stress-strength interference model based on universal generating function[J].Reliability Engineering and System Safety,2008,93(10):1485-1490
[5]	王正.零部件与系统动态可靠性建模理论与方法.沈阳:东北大学机械工程学院,2008 Wang Zheng.Theory and method for time-dependent reliability models of components and systems.Shenyang:Department of Mechanical Engineering,Northeastern University,2008(in Chinese)
[6]	张义民.任意分布参数的机械零件的可靠性灵敏度设计[J].机械工程学报,2004,40(8):100-105 Zhang Yimin.Reliability sensitivity design for mechanical elements with arbitrary distribution parameters[J].Chinese Journal of Mechanical Engineering,2004,40(8):100-105(in Chinese)
[7]	茆诗松,王静龙,濮晓龙.高等数理统计[M].北京:高等教育出版社,1998 Mao Shisong,Wang Jinglong,Pu Xiaolong.Advanced mathematical statistics[M].Beijing:China Higher Education Press,1998(in Chinese)
[8]	左勇志,刘西拉.结构动态可靠性的全随机过程模型[J].清华大学学报:自然科学版,2004,44(3):395-397,405 Zuo Yongzhi,Liu Xila.Fully stochastic analysis method for structural dynamic reliability[J].Journal of Tsinghua University:Science and Technology,2004,44(3):395-397,405(in Chinese)
[9]	姚卫星.结构疲劳寿命分析[M].北京:国防工业出版社,2003 Yao Weixing.Fatigue life prediction of structures[M].Beijing:National Defense Industrial Press,2003(in Chinese)
[10]	Cazuguel M,Renaud C,Cognard J Y.Time-variant reliability of nonlinear structures:application to a representative part of a plate floor[J].Quality and Reliability Engineering International,2006,22(1):101-108
[11]	Xue Xiaoling,Fei Heliang.Parameter estimation of the Weibull distribution tampered failure rate model under a normal stress[J].Chinese Journal of Applied Probability and Statistics,2004,20(2):126-132
[12]	Xie M,Tang Y,Goh T N.A modified Weibull extension with bathtub-shaped failure rate function[J].Reliability Engineering and System Safety,2002,76(3):279-285
[13]	Zafiropoulos E P,Dialynas E N.Reliability and cost optimization of electronic devices considering the component failure rate uncertainty[J].Reliability Engineering and System Safety,2004,84(3):271-284
[14]	Rosario Toscano,Patrick Lyonnet.On-line reliability prediction via dynamic failure rate model[J].IEEE Transactions on Reliability,2008,57(3):452-457