高温结构可靠性分析的时变响应面法

马小兵; 任宏道; 蔡义坤

doi:10.13700/j.bh.1001-5965.2014.0142

高温结构可靠性分析的时变响应面法

doi: 10.13700/j.bh.1001-5965.2014.0142

1.
北京麻豆精品秘国产传媒可靠性与系统工程学院, 北京 100191
2. 北京麻豆精品秘国产传媒可靠性与环境工程技术国防科技重点实验室, 北京 100191

基金项目:

国家自然科学基金资助项目(61104133)

详细信息

通讯作者:
马小兵(1978—), 男, 陕西铜川人, 高级工程师, maxiaobing@cq5520.com, 主要研究方向为寿命与可靠性评估.

中图分类号: TB114.3
计量
- 文章访问数: 1521
- HTML全文浏览量: 282
- PDF下载量: 538
- 被引次数: 0
出版历程
- 收稿日期: 2014-03-21
- 网络出版日期: 2015-02-20

Time-varying response surface method for high-temperature structural reliability analysis

1.
School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. Key Laboratory of National Defense Technology for Reliability & Environment Engineering Technology, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 高温条件下结构的本构方程和承载能力都随时间变化,传统的结构可靠性模型在分析这种时变结构可靠性问题时效率较低.提出一种可用于高温结构可靠性分析的热响应与响应量阈值均随时间变化的时变响应面法.首先,通过引入结构各基本变量与时间的交叉二次函数并结合Box-Behnken试验设计建立结构热响应量的时变模型;进而,以温度为中间变量,建立结构响应量阈值与时间的函数关系,据此得到用随机过程表示的时变极限状态函数.具体给出了基本变量服从正态分布情形下的结构时变可靠度计算方法.算例分析表明该方法切实可行,能够在保证计算精度的基础上大幅提高计算效率.
- 高温结构 /
- 试验设计 /
- 时变响应面法 /
- 时变极限状态函数 /
- 结构可靠性
Abstract: The constitutive equation and carrying capacity of structure will change over time under high temperature conditions. The traditional structural reliability models are inefficient to solve these time-varying structural reliability problems. A time-varying response surface method with thermal response and response threshold value changing over time was proposed. The method can be used for high-temperature structural reliability analysis. Combined with Box-Behnken experimental design, a cross quadratic function of structure's basic variables and time was introduced for establishing a time-varying model of the thermal structural response. The function of structural response threshold value and time was established by using temperature as intermediate variable. The time-varying structural reliability calculation method was proposed when basic variables are normally distributed. A study case was given to demonstrate the applicability of this method and its greatly enhanced effectiveness besides accuracy.
- high-temperature structure /
- experimental design /
- time-varying response surface method /
- time-varying limit state function /
- structure reliability

HTML全文

参考文献(15)

[1]	Moses P L, Rausch V L,Nguyen L T,et al.NASA hypersonic flight demonstrators-overview, status,and future plans[J].Acta Astronautica,2004,55(3-9):619-630.
[2]	Joshi O, Pénélope L.Stability analysis of a partitioned fluid-structure thermal coupling algorithm[J].Journal of Thermophysics and Heat Transfer,2014,28(1):59-67.
[3]	唐健,吴志刚, 杨超.考虑结构刚度不确定性的概率颤振分析[J].北京麻豆精品秘国产传媒学报,2014,40(4):569-574. Tang J,Wu Z G,Yang C.Probabilistic flutter analysis with uncertainties in structural stiffness[J].Journal of Beijing University of Aeronautics and Astronautics,2014,40(4):569-574(in Chinese).
[4]	Bucher C G, Bourgund U.A fast and efficient response surface approach for structural reliability problems[J].Structural Safety,1990,7(1):57-66.
[5]	汪保,孙泰. 改进的Kriging模型的可靠度计算[J].计算机仿真,2011,28(2):113-116. Wang B,Sun T.Structural reliability computation based on Kriging model[J].Computer Simulation,2011,28(2):113-116(in Chinese).
[6]	吕震宙,杨子政, 赵洁.基于加权线性响应面法的神经网络可靠性分析方法[J].航空学报,2006,27(6):1063-1067. Lü Z Z,Yang Z Z,Zhao J.An artificial neural network method for reliability analysis based on weighted linear response surface[J].Acta Aeronautica et Astronautica Sinica,2006,27(6):1063-1067(in Chinese).
[7]	赵卫,刘济科. 基于支持向量机回归的迭代序列响应面可靠度计算方法[J].机械强度,2008,30(6):916-920. Zhao W,Liu J K.Iterative sequence response surface method for reliability computation based on support vector regression[J].Journal of Mechanical Strength,2008,30(6):916-920(in Chinese).
[8]	姜潮,黄新萍, 韩旭,等.含区间不确定性的结构时变可靠度分析方法[J].机械工程学报,2013,49(10):186-193. Jiang C,Huang X P,Han X,et al.Time-dependent structural reliability analysis method with interval uncertainty[J].Journal of Mechanical Engineering,2013,49(10):186-193(in Chinese).
[9]	Chakraborty B, Bhar A.Time-varying reliability analysis using a response surface method for a laminated plate under a dynamic load[J].Journal of Engineering for the Maritime Environment,2014,226(3):260-272.
[10]	Liu J,Li Y. An improved adaptive response surface method for structural reliability analysis[J].Journal of Central South University,2012,19:1148-1154.
[11]	Rackwitz R. Reliability analysis:a review and some perspectives[J].Structural Safety,2001,23(4):365-395.
[12]	Gavin H P, Yau S C.High-order limit state functions in the response surface method for structural reliability analysis[J].Structural Safety,2008,30(2):162-179.
[13]	Ferreira S L C, Bruns R E,Ferreira H S,et al.Box-Behnken design:an alternative for the optimization of analytical methods[J].Analytica Chimica Acta,2007,597(2):179-186.
[14]	付剑平,陆民燕, 阮镰,等.试验设计在软件可靠性测试中的应用[J].北京麻豆精品秘国产传媒学报,2008,34(12):1379-1383. Fu J P,Lu M Y,Ruan L,et al.Experimental design for software reliability testing[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(12):1379-1383(in Chinese).
[15]	Song G M, Zhou Y,Kang S J L.Experimental description of thermomechanical properties of carbon fiber-reinforced TiC matrix composites[J].Materials & Design,2003,24(8):639-646.